- whatsapp +51955515985
- support@ecuforcetruck.com
- 24/7 Customer Support
Menu
Shop
Account
Subtotal: $0.00
No products in the cart.
Circuit Description
The ECM monitors the NOx concentration in the engine’s exhaust gases using an aftertreatment intake NOx sensor and aftertreatment outlet NOx sensor. By comparing these two values, the ECM is able to determine the conversion efficiency of the SCR catalyst and dosing system. Critically low NOx conversion efficiency is an indication of a missing SCR catalyst.
Component Location
The SCR catalyst is located in the vehicle’s exhaust system, after the diesel particulate filter and decomposition tube.
Conditions for Running the Diagnostics
This diagnostic has to meet specific engine and aftertreatment conditions to run and complete. NOx sensor data is gathered over varying engine speeds and loads. When enough data has been gathered, the diagnostic will run, make a pass/fail decision, and begin to gather data again.
Conditions for Setting the Fault Codes
The ECM has detected that the NOx conversion efficiency of the SCR catalyst is critically low.
Action Taken When the Fault Code is Active
The ECM illuminates the amber CHECK ENGINE lamp and/or the Malfunction Indicator Lamp (MIL) immediately when the diagnostic runs and fails for two consecutive trips.
Diesel exhaust fluid injection into the aftertreatment system is disabled.
Engine torque will be reduced if the engine is operated for a limited period of time with the fault code active.
Engine torque will be severely reduced and vehicle speed will be limited to 8 km [5 mi] per hour after extended engine operation with the fault code active.
Conditions for Clearing the Fault Code
After completing a stationary regeneration (as instructed in this fault code troubleshooting tree) and no additional faults become active, the repair has been validated. Note that this fault code will still be active
It is necessary to use the “Reset All Faults” command in INSITE? electronic service tool to clear this fault and extinguish the amber CHECK ENGINE lamp and/or MIL
Shop Talk
Troubleshoot all other active NOx sensor and SCR dosing system related fault codes before this fault.
Possible causes of this fault include:
Incorrect calibration revision on INCAL? CD
Tampering with SCR catalyst system, removal of SCR catalyst from vehicle, or malfunctioning SCR catalyst
Malfunctioning diesel exhaust fluid dosing system
Exhaust system leaks
Degraded, diluted, or incorrect diesel exhaust fluid
Diesel exhaust fluid deposits in decomposition tube.
This fault code can be set as a result of multiple failure modes. All steps of the troubleshooting tree must be completed.
Reference the appropriate OEM wiring diagram when troubleshooting circuits that utilize wiring supplied by the OEM.
For intermittent power supply and datalink communication issues with Aftertreatment Components, it is highly recommended that the OEM Power Distribution Center fuses and relays be thoroughly checked for loose, missing or intermittent connections.
Possible Cause:
1) Aftertreatment NOx sensor failure
2) Aftertreatment DEF dosing unit Filter failure
3) Aftertreatment SCR catalyst failure
4) ECM calibration
Related
Categories Cumminz, DTC TRUCKS, ISX15 CM2250 (2010-12)Tags 2010-12, 31, 3151, 4794, Aftertreatment, Catalyst, CM2250, Code, Condition, Cummins, Exists, Fault, FMI, ISX15, Missing-, MR, PID, SCR, SPN, System
Wiring Diagrams
Component Locators
- Magic Tuner [paccar, Maxxforce, Detroit, Caterpillar, Delete]
Magic Tuner$50.00
Rated 0 out of 5
- DDDL 8.17 2023 Detroit Diesel Diagnostic Link Software
Detroit$96.00
Rated 0 out of 5
- download JPRO 2023 1.2 off-highway – on-highway
JPRO$96.00
Rated 0 out of 5
Scania$30.00
Rated 0 out of 5
- CUMMINnSsg INSITEr 8.7.0.86 PRO + ZAP-IT
cummisznn$70.00
Rated 0 out of 5
- Cat Factory Password Generator 1.0 2019 WINDOWS 10
CAT$55.00
Rated 0 out of 5
- Diagnostic Software PSI Powerlink 2.3.1
PSI Powerlink$94.00
Rated 0 out of 5
- CAT ET 2022A Advanced diagnostic software for Caterpillar equipment
CAT$95.00
Rated 0 out of 5
- 2021 VOLVO PREMIUM TECH TOOL PTT V2.8.21 VCADS+DEVELOPER TOOL+APCI 2021/09 ( 1 PC )
Trucks software$85.00
Rated 0 out of 5
- NAVISTAR ENGINE CYLINDER PERFORMANCE ANALYZER V7.8.8.1
Navistar$52.00
Rated 0 out of 5
- Perkins SPI2 2018A Dealer Parts and Service
Perkins$50.00
Rated 0 out of 5
- Perkins EST 2016C Electronic Service Tool
Perkins$50.00
Rated 0 out of 5
- Isuzu IDSS 2021 Diagnostic Software
ISUZU$100.00
Rated 0 out of 5
- Bobcat Service Library [03.2019] Service, Operator, Maintenance, Bulletines, etc full update
Bobcat$110.00
Rated 0 out of 5
- Eaton Service Ranger 4 4.2 database 2017
Eaton$50.00
Rated 0 out of 5
- Volvo I-Shift service manual PDF
TRUCK MANUALS$55.00
Rated 0 out of 5
- Volvo Intermediate Storage File Encryptor/Decryptor (Editor) VISFED 0.3.2
Trucks software$35.00
Rated 0 out of 5
- DOWNLOAD Volvo VODIA 5.2.50 works with VOCOM + video
Trucks software$98.00
Rated 0 out of 5
- Wabco PIN Code Calculator Diagnostic Software PIN 1 PIN 2
Trucks software$10.00
Rated 0 out of 5
- Cumming Caltem 5.9.1 2022 ( 1 PC )
cummisznn$78.00
Rated 0 out of 5
Related products
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
- PACCAR PX-9 CM2350 (2013-17) Fault Code:3634 PID: SPN:5484 FMI:4 Engine Fan Clutch 2 Control Circuit – Voltage Below Normal or Shorted to Low Source
DTC TRUCKS
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
1000 & 2000 Gen 4$50.00
Rated 0 out of 5
- SERVICE MANUAL HINO FD.FE.FF.SG 2008
HINO$34.00
Rated 0 out of 5
- SERVICE MANUAL HINO FD.FE.FF.SG 2017
HINO$36.00
Rated 0 out of 5
- SERVICE MANUAL EATON CEEMAT TRSM0020
EATON$24.00
Rated 0 out of 5
- MANUAL SERVICE DEUTZ AGROTRON 130-140-155-165 MK3
DEUTZ$37.00
Rated 0 out of 5
DETROIT$38.00
Rated 0 out of 5
- SERVICE MANUAL BOBCAT 3450 sms
BOBCAT$35.00
Rated 0 out of 5
- SERVICE MANUAL Mack ASET-AC (CEGR) Engine
MACK$28.00
Rated 0 out of 5
- SERVICE MANUAL Detroit Diesel – Fuel System Bulletin – MBE 4000-06a
DETROIT$45.00
Rated 0 out of 5
- SERVICE MANUAL FUSO CANTER 2010
FUSO$54.00
Rated 0 out of 5
CARRIE$20.00
Rated 0 out of 5